From: Lott, Christopher (cl778h) Date: Wed, 21 Aug 2019 14:54:25 +0000 (-0400) Subject: Lift PyPI templates to Global-JJB from Acumos X-Git-Tag: v0.44.0^2 X-Git-Url: https://gerrit.linuxfoundation.org/infra/gitweb?a=commitdiff_plain;ds=inline;h=refs%2Fchanges%2F32%2F16632%2F43;p=releng%2Fglobal-jjb.git Lift PyPI templates to Global-JJB from Acumos New templates provide features to build and push Python source and binary distributions to a PyPI repository. Check version string and push a tag on release. New job groups: {project-name}-gerrit-pypi-jobs {project-name}-github-pypi-jobs New templates: {project-name}-pypi-verify-{stream} gerrit-pypi-verify github-pypi-verify {project-name}-pypi-merge-{stream} gerrit-pypi-merge github-pypi-merge {project-name}-pypi-release-verify-{stream} gerrit-pypi-release-verify github-pypi-release-verify {project-name}-pypi-release-merge-{stream} gerrit-pypi-release-merge github-pypi-release-merge Change-Id: If74925623f2a5804de8684b9a9933573dfea29a1 Issue-Id: RELENG-2317 Signed-off-by: Lott, Christopher (cl778h) --- diff --git a/.jjb-test/lf-python-jobs.yaml b/.jjb-test/lf-python-jobs.yaml index 6a10b8f5..dd94c646 100644 --- a/.jjb-test/lf-python-jobs.yaml +++ b/.jjb-test/lf-python-jobs.yaml @@ -4,6 +4,9 @@ jobs: - "{project-name}-python-jobs" - gerrit-tox-sonar + - gerrit-pypi-merge + - gerrit-pypi-release-verify + - gerrit-pypi-release-merge project-name: gerrit-python @@ -12,6 +15,9 @@ jobs: - "{project-name}-github-python-jobs" - github-tox-sonar + - github-pypi-merge + - github-pypi-release-verify + - github-pypi-release-merge project-name: github-python diff --git a/docs/conf.py b/docs/conf.py index 4457e120..ca63745c 100644 --- a/docs/conf.py +++ b/docs/conf.py @@ -74,7 +74,7 @@ master_doc = 'index' # General information about the project. project = 'lf-releng-global-jjb' -copyright = '2017, The Linux Foundation' +copyright = '2019, The Linux Foundation' author = 'Linux Foundation Releng' # The version info for the project you're documenting, acts as replacement for diff --git a/docs/jjb/lf-python-jobs.rst b/docs/jjb/lf-python-jobs.rst index 175f0e26..bea44fc4 100644 --- a/docs/jjb/lf-python-jobs.rst +++ b/docs/jjb/lf-python-jobs.rst @@ -7,7 +7,7 @@ Job Groups .. include:: ../job-groups.rst -Below is a list of Maven job groups: +Below is a list of Python job groups: .. literalinclude:: ../../jjb/lf-python-job-groups.yaml :language: yaml @@ -19,31 +19,51 @@ Macros lf-infra-clm-python ------------------- -Run CLM scanning against a Python project. +Runs CLM scanning against a Python project. :Required Parameters: :clm-project-name: Project name in Nexus IQ to send results to. +lf-infra-pypi-tag-release +------------------------- + +Checks the format of the release version string and checks the git +repository for that tag. In a merge job, continues to tag the repository +and push the tag to the git server. Also installs supporting tools +including Sigul and lftools. Sigul requires a CentOS build node. + +lf-infra-pypi-upload +-------------------- + +Uploads distribution files from subdirectory "dist" to a PyPI repository +using a Python virtual enviroment to install required packages. The +Jenkins server must have a configuration file ".pypirc". + +:Required Parameters: + + :pypi-repo: PyPI repository key in .pypirc configuration file; + e.g., "staging" or "pypi". + lf-infra-tox-install -------------------- -Install Tox into a virtualenv. +Installs Tox into a virtualenv. :Required Parameters: - :python-version: Version of Python to install into the Tox virtualenv. - Eg. python2 / python3 + :python-version: Version of Python to invoke the pip install of the tox-pyenv + package that creates a virtual environment, either "python2" or "python3". -lf-tox-install --------------- +lf-infra-tox-run +---------------- -Runs a shell script that installs tox in a Python virtualenv. +Creates a Tox virtual environment and invokes tox. :Required Parameters: - :python-version: Base Python version to use in the virtualenv. For example - python2 or python3. + :parallel: Boolean. If true use detox (distributed tox); + else use regular tox. Job Templates @@ -55,9 +75,9 @@ Python XC CLM CLM scans for Python based repos. This job will call the Nexus IQ CLI directly to run the scans. -A new credential named "nexus-iq-xc-clm" needs to exist in the Jenkins credentials. -The credential should contain the username and password to access Nexus -IQ Server. +A new credential named "nexus-iq-xc-clm" needs to exist in the Jenkins +credentials. The credential should contain the username and password +to access Nexus IQ Server. :Template Names: @@ -97,30 +117,29 @@ IQ Server. :submodule-disable: Disable submodule checkout operation. (default: false) :gerrit_clm_triggers: Override Gerrit Triggers. - :gerrit_trigger_file_paths: Override file paths which used to filter which - file modifications will trigger a build. Refer to JJB documentation for - "file-path" details. + :gerrit_trigger_file_paths: Override file paths used to filter which file + modifications trigger a build. Refer to JJB documentation for "file-path" details. https://docs.openstack.org/infra/jenkins-job-builder/triggers.html#triggers.gerrit Python Sonar with Tox --------------------- -Sonar scans for Python based repos. This job invokes tox to run tests and -gather coverage statistics from the test results, then invokes Maven to -publish the results to a Sonar server. +Sonar scans for Python based repos. This job invokes tox to run tests +and gather coverage statistics from the test results, then invokes +Maven to publish the results to a Sonar server. -To get the Sonar coverage results, file tox.ini must exist and contain coverage -commands to run. +To get the Sonar coverage results, file tox.ini must exist and contain +coverage commands to run. -The coverage commands define the code that gets executed by the test suites. -Checking coverage does not guarantee that the tests execute properly, but it -identifies code that is not executed by any test. +The coverage commands define the code that gets executed by the test +suites. Checking coverage does not guarantee that the tests execute +properly, but it identifies code that is not executed by any test. -This job reuses the Sonar builder used in Java/Maven projects which runs maven -twice. The first invocation does nothing for Python projects, so the job uses -the goal 'validate' by default. The second invocation publishes results using -the goal 'sonar:sonar' by default. +This job reuses the Sonar builder used in Java/Maven projects which +runs maven twice. The first invocation does nothing for Python +projects, so the job uses the goal 'validate' by default. The second +invocation publishes results using the goal 'sonar:sonar' by default. For example: @@ -169,10 +188,13 @@ https://docs.sonarqube.org/display/PLUG/Python+Coverage+Results+Import :mvn-global-settings: The name of the Maven global settings to use for :mvn-goals: The Maven goal to run first. (default: validate) :mvn-version: Version of maven to use. (default: mvn35) + :parallel: Boolean indicator for tox to run tests in parallel or series. + (default: false, in series) :pre-build-script: Shell script to execute before the Sonar builder. For example, install prerequisites or move files to the repo root. - (default: a string with a comment) - :python-version: Python version (default: python2) + (default: a string with a shell comment) + :python-version: Python version to invoke pip install of tox-pyenv + (default: python2) :sonar-mvn-goal: The Maven goal to run the Sonar plugin. (default: sonar:sonar) :stream: Keyword used to represent a release code-name. Often the same as the branch. (default: master) @@ -183,19 +205,19 @@ https://docs.sonarqube.org/display/PLUG/Python+Coverage+Results+Import :submodule-disable: Disable submodule checkout operation. (default: false) :gerrit_sonar_triggers: Override Gerrit Triggers. - :gerrit_trigger_file_paths: Override file paths which used to filter which - file modifications will trigger a build. Refer to JJB documentation for - "file-path" details. + :gerrit_trigger_file_paths: Override file paths used to filter which file + modifications trigger a build. Refer to JJB documentation for "file-path" details. https://docs.openstack.org/infra/jenkins-job-builder/triggers.html#triggers.gerrit Tox Verify ---------- -Tox runner to verify a project on creation of a patch set. -This job is pyenv aware so if the image contains an installation of pyenv -at /opt/pyenv it will pick it up and run Python tests with the appropriate -Python versions. This job will set the following pyenv variables before running. +Tox runner to verify a project on creation of a patch set. This job +is pyenv aware so if the image contains an installation of pyenv at +/opt/pyenv it will pick it up and run Python tests with the +appropriate Python versions. This job will set the following pyenv +variables before running. .. code:: bash @@ -225,8 +247,10 @@ Python versions. This job will set the following pyenv variables before running. :pre-build-script: Shell script to execute before the Tox builder. For example, install prerequisites or move files to the repo root. (default: a string with a shell comment) - :python-version: Version of Python to configure as a base in virtualenv. - (default: python3) + :parallel: Boolean indicator for tox to run tests in parallel or series. + (default: false, in series) + :python-version: Python version to invoke pip install of tox-pyenv + (default: python2) :stream: Keyword representing a release code-name. Often the same as the branch. (default: master) :submodule-recursive: Whether to checkout submodules recursively. @@ -236,23 +260,23 @@ Python versions. This job will set the following pyenv variables before running. :submodule-disable: Disable submodule checkout operation. (default: false) :tox-dir: Directory containing the project's tox.ini relative to - the workspace. Empty works if tox.ini is at project root. - (default: '') + the workspace. The default uses tox.ini at the project root. + (default: '.') :tox-envs: Tox environments to run. If blank run everything described in tox.ini. (default: '') - :gerrit_trigger_file_paths: Override file paths used to filter which - file modifications will trigger a build. Refer to JJB documentation for - "file-path" details. + :gerrit_trigger_file_paths: Override file paths used to filter which file + modifications trigger a build. Refer to JJB documentation for "file-path" details. https://docs.openstack.org/infra/jenkins-job-builder/triggers.html#triggers.gerrit Tox Merge --------- -Tox runner to verify a project after merge of a patch set. -This job is pyenv aware so if the image contains an installation of pyenv -at /opt/pyenv it will pick it up and run Python tests with the appropriate -Python versions. This job will set the following pyenv variables before running. +Tox runner to verify a project after merge of a patch set. This job +is pyenv aware so if the image contains an installation of pyenv at +/opt/pyenv it will pick it up and run Python tests with the +appropriate Python versions. This job will set the following pyenv +variables before running. .. code:: bash @@ -282,7 +306,352 @@ Python versions. This job will set the following pyenv variables before running. :pre-build-script: Shell script to execute before the CLM builder. For example, install prerequisites or move files to the repo root. (default: a string with only a comment) - :python-version: Version of Python to configure as a base in virtualenv. + :python-version: Python version to invoke pip install of tox-pyenv + (default: python2) + :stream: Keyword representing a release code-name. + Often the same as the branch. (default: master) + :submodule-recursive: Whether to checkout submodules recursively. + (default: true) + :submodule-timeout: Timeout (in minutes) for checkout operation. + (default: 10) + :submodule-disable: Disable submodule checkout operation. + (default: false) + :tox-dir: Directory containing the project's tox.ini relative to + the workspace. The default uses tox.ini at the project root. + (default: '.') + :tox-envs: Tox environments to run. If blank run everything described + in tox.ini. (default: '') + :gerrit_trigger_file_paths: Override file paths used to filter which file + modifications trigger a build. Refer to JJB documentation for "file-path" details. + https://docs.openstack.org/infra/jenkins-job-builder/triggers.html#triggers.gerrit + + +PyPI Verify +----------- + +Verifies a Python library project on creation of a patch set. Runs tox +then builds a source distribution and (optionally) a binary +distribution. The project repository must have a setup.py file with +configuration for packaging the component. + +The tox runner is pyenv aware so if the image contains an installation +of pyenv at /opt/pyenv it will pick it up and run Python tests with +the appropriate Python versions. The tox runner sets the following +pyenv variables before running. + +.. code:: bash + + export PYENV_ROOT="/opt/pyenv" + export PATH="$PYENV_ROOT/bin:$PATH" + +:Template Names: + + - {project-name}-pypi-verify-{stream} + - gerrit-pypi-verify + - github-pypi-verify + +:Comment Trigger: recheck + +:Required Parameters: + + :build-node: The node to run the build on. + :jenkins-ssh-credential: Credential to use for SSH. (Generally set + in defaults.yaml) + +:Optional Parameters: + + :branch: The branch to build against. (default: master) + :build-days-to-keep: Days to keep build logs in Jenkins. (default: 7) + :build-timeout: Timeout in minutes before aborting build. (default: 15) + :dist-binary: Whether to build a binary wheel distribution. (default: true) + :git-url: URL clone project from. (default: $GIT_URL/$PROJECT) + :parallel: Boolean indicator for tox to run tests in parallel or series. + (default: false, in series) + :pre-build-script: Shell script to execute before the tox builder. For + example, install system prerequisites. (default: a shell comment) + :python-version: Python version to invoke pip install of tox-pyenv + (default: python3) + :stream: Keyword representing a release code-name. + Often the same as the branch. (default: master) + :submodule-recursive: Whether to checkout submodules recursively. + (default: true) + :submodule-timeout: Timeout (in minutes) for checkout operation. + (default: 10) + :submodule-disable: Disable submodule checkout operation. + (default: false) + :tox-dir: Directory containing the project's tox.ini relative to + the workspace. The default uses tox.ini at the project root. + (default: '.') + :tox-envs: Tox environments to run. If blank run everything described + in tox.ini. (default: '') + :gerrit_trigger_file_paths: Override file paths used to filter which file + modifications trigger a build. Refer to JJB documentation for "file-path" details. + https://docs.openstack.org/infra/jenkins-job-builder/triggers.html#triggers.gerrit + + +PyPI Merge +---------- + +Creates and uploads distribution files on merge of a patch set. Runs +tox, builds a source distribution and (optionally) a binary +distribution, and uploads the distribution(s) to a PyPI repository. +This job should be configured to use a staging PyPI repository like +testpypi.python.org, not a public release area like the global PyPI +repository. Like the verify job, this requires a setup.py file for +packaging the component. + +The tox runner is pyenv aware so if the image contains an installation +of pyenv at /opt/pyenv it will pick it up and run Python tests with +the appropriate Python versions. The tox runner sets the following +pyenv variables before running. + +.. code:: bash + + export PYENV_ROOT="/opt/pyenv" + export PATH="$PYENV_ROOT/bin:$PATH" + + +Requires a .pypirc configuration file in the Jenkins builder home +directory, an example appears next. + +.. code-block:: bash + + [distutils] # this tells distutils what package indexes you can push to + index-servers = + staging + pypi + + [staging] + repository: https://testpypi.python.org/pypi + username: your_username + password: your_password + + [pypi] + repository: https://pypi.python.org/pypi + username: your_username + password: your_password + + +:Template Names: + + - {project-name}-pypi-merge-{stream} + - gerrit-pypi-merge + - github-pypi-merge + +:Comment Trigger: pypi-remerge + +:Required Parameters: + + :build-node: The node to run the build on. + :jenkins-ssh-credential: Credential to use for SSH. (Generally set + in defaults.yaml) + +:Optional Parameters: + + :branch: The branch to build against. (default: master) + :build-days-to-keep: Days to keep build logs in Jenkins. (default: 7) + :build-timeout: Timeout in minutes before aborting build. (default: 15) + :dist-binary: Whether to build a binary wheel distribution. (default: true) + :git-url: URL clone project from. (default: $GIT_URL/$PROJECT) + :parallel: Boolean indicator for tox to run tests in parallel or series. + (default: false, in series) + :pre-build-script: Shell script to execute before the tox builder. For + example, install system prerequisites. (default: a shell comment) + :pypi-repo: Key for PyPI repository parameters in the .pypirc file. + Merge jobs should use a server like testpypi.python.org. (default: staging) + :python-version: Python version to invoke pip install of tox-pyenv + (default: python3) + :stream: Keyword representing a release code-name. + Often the same as the branch. (default: master) + :submodule-recursive: Whether to checkout submodules recursively. + (default: true) + :submodule-timeout: Timeout (in minutes) for checkout operation. + (default: 10) + :submodule-disable: Disable submodule checkout operation. + (default: false) + :tox-dir: Directory containing the project's tox.ini relative to + the workspace. The default uses tox.ini at the project root. + (default: '.') + :tox-envs: Tox environments to run. If blank run everything described + in tox.ini. (default: '') + :gerrit_trigger_file_paths: Override file paths used to filter which file + modifications trigger a build. Refer to JJB documentation for "file-path" details. + https://docs.openstack.org/infra/jenkins-job-builder/triggers.html#triggers.gerrit + + +PyPI Release Verify +------------------- + +Verifies a Python library project on creation of a patch set with a +release yaml file. Runs tox, builds source and (optionally) binary +distributions, checks the format of the version string, checks that +the distribution file names contain the release version string, and +checks that no tag exists in the code repository for the release +version. + +To initiate the release process, create a releases/ or .releases/ +directory at the root of the project repository, add one release yaml +file to it, and submit a change set with that release yaml file. A +schema and and an example for the release yaml file appear below. The +version in the release yaml file must be a valid Semantic Versioning +(SemVer) string, matching either the pattern "v#.#.#" or "#.#.#" where +"#" is one or more digits. + +This job is similar to the PyPI verify job, but is only triggered by a +patch set with a release yaml file. + +The build node for PyPI release verify jobs must be CentOS, which +supports the sigul client for accessing a signing server. + +.. note:: + + The release file regex is: (releases\/.*\.yaml|\.releases\/.*\.yaml). + In words, the directory name can be ".releases" or "releases"; the file + name can be anything with suffix ".yaml". + +The JSON schema for a pypi release file appears below. + +.. code-block:: none + + --- + $schema: "http://json-schema.org/schema#" + $id: "https://github.com/lfit/releng-global-jjb/blob/master/release-pypi-schema.yaml" + + required: + - "distribution_type" + - "project" + - "version" + + properties: + distribution_type: + type: "string" + project: + type: "string" + version: + type: "string" + + +An example of a pypi release file appears below. + +.. code-block:: none + + $ cat releases/1.0.0-pypi.yaml + --- + distribution_type: pypi + version: 1.0.0 + project: 'example-project' + + +:Template Names: + + - {project-name}-pypi-release-verify-{stream} + - gerrit-pypi-release-verify + - github-pypi-release-verify + +:Required Parameters: + + :build-node: The node to run build on, which must be Centos. + :jenkins-ssh-credential: Credential to use for SSH. (Generally set + in defaults.yaml) + +:Optional Parameters: + + :branch: The branch to build against. (default: master) + :build-days-to-keep: Days to keep build logs in Jenkins. (default: 7) + :build-timeout: Timeout in minutes before aborting build. (default: 15) + :dist-binary: Whether to build a binary wheel distribution. (default: true) + :git-url: URL clone project from. (default: $GIT_URL/$PROJECT) + :parallel: Boolean indicator for tox to run tests in parallel or series. + (default: false, in series) + :pre-build-script: Shell script to execute before the tox builder. + For example, install prerequisites or move files to the repo root. + (default: a string with a shell comment) + :pypi-repo: Key for PyPI repository parameters in the .pypirc file. + Release jobs should use a server like pypy.org. (default: pypi) + :python-version: Python version to invoke pip install of tox-pyenv + (default: python3) + :stream: Keyword representing a release code-name. + Often the same as the branch. (default: master) + :submodule-recursive: Whether to checkout submodules recursively. + (default: true) + :submodule-timeout: Timeout (in minutes) for checkout operation. + (default: 10) + :submodule-disable: Disable submodule checkout operation. + (default: false) + :tox-dir: Directory containing the project's tox.ini relative to + the workspace. The default uses tox.ini at the project root. + (default: '.') + :tox-envs: Tox environments to run. If blank run everything described + in tox.ini. (default: '') + :use-release-file: Whether to use the release file. (default: true) + :gerrit_trigger_file_paths: Override file paths used to filter which file + modifications trigger a build. Refer to JJB documentation for "file-path" details. + https://docs.openstack.org/infra/jenkins-job-builder/triggers.html#triggers.gerrit + + +PyPI Release Merge +------------------ + +Publishes a Python library on merge of a patch set with a release yaml +file. Runs tox, builds source and (optionally) binary distributions, +checks the format of the version string, checks that the distribution +file names contain the release version string, checks that no tag +exists in the code repository for the release version, tags the code +repository with the release version, pushes the tag to the git server, +and uploads distributions to a PyPI repository. + +This job is similar to the PyPI merge job, but is only triggered by +merge of a release yaml file and checks the version and tag before +uploading to a public repository such as PyPI. + +See the PyPI Release Verify job above for documentation of the release +yaml file format. + +The build node for PyPI release merge jobs must be CentOS, which +supports the sigul client for accessing a signing server. + +A Jenkins user can also trigger this release job via the "Build with +parameters" action, removing the need to merge a release yaml file. +The user must enter parameters in the same way as a release yaml file, +except for the special USE_RELEASE_FILE and DRY_RUN check boxes. The +user must uncheck the USE_RELEASE_FILE check box if the job should run +with a release file, while passing the required information as build +parameters. Similarly, the user must uncheck the DRY_RUN check box to +test the job while skipping upload of files to a repository. + +The special parameters are as follows:: + + VERSION = 1.0.0 + USE_RELEASE_FILE = false + DRY_RUN = false + +:Template Names: + + - {project-name}-pypi-release-merge-{stream} + - gerrit-pypi-release-merge + - github-pypi-release-merge + +:Required Parameters: + + :build-node: The node to run build on, which must be Centos. + :jenkins-ssh-credential: Credential to use for SSH. (Generally set + in defaults.yaml) + +:Optional Parameters: + + :branch: The branch to build against. (default: master) + :build-days-to-keep: Days to keep build logs in Jenkins. (default: 7) + :build-timeout: Timeout in minutes before aborting build. (default: 15) + :dist-binary: Whether to build a binary wheel distribution. (default: true) + :git-url: URL clone project from. (default: $GIT_URL/$PROJECT) + :parallel: Boolean indicator for tox to run tests in parallel or series. + (default: false, in series) + :pre-build-script: Shell script to execute before the tox builder. + For example, install prerequisites or move files to the repo root. + (default: a string with a shell comment) + :pypi-repo: Key for PyPI repository parameters in the .pypirc file. + Release jobs should use a server like pypy.org. (default: pypi) + :python-version: Python version to invoke pip install of tox-pyenv (default: python3) :stream: Keyword representing a release code-name. Often the same as the branch. (default: master) @@ -293,11 +662,11 @@ Python versions. This job will set the following pyenv variables before running. :submodule-disable: Disable submodule checkout operation. (default: false) :tox-dir: Directory containing the project's tox.ini relative to - the workspace. Empty works if tox.ini is at project root. - (default: '') + the workspace. The default uses tox.ini at the project root. + (default: '.') :tox-envs: Tox environments to run. If blank run everything described in tox.ini. (default: '') - :gerrit_trigger_file_paths: Override file paths used to filter which - file modifications will trigger a build. Refer to JJB documentation for - "file-path" details. + :use-release-file: Whether to use the release file. (default: true) + :gerrit_trigger_file_paths: Override file paths used to filter which file + modifications trigger a build. Refer to JJB documentation for "file-path" details. https://docs.openstack.org/infra/jenkins-job-builder/triggers.html#triggers.gerrit diff --git a/jjb/lf-python-job-groups.yaml b/jjb/lf-python-job-groups.yaml index 59066f93..60ecc660 100644 --- a/jjb/lf-python-job-groups.yaml +++ b/jjb/lf-python-job-groups.yaml @@ -3,7 +3,7 @@ name: "{project-name}-python-jobs" # This job group contains all the recommended jobs that should be deployed - # for any project ci that is using Gerrit. + # for a Gerrit-based Python project to verify commits using tox. jobs: - gerrit-python-xc-clm @@ -14,9 +14,33 @@ name: "{project-name}-github-python-jobs" # This job group contains all the recommended jobs that should be deployed - # for any project ci that is using GitHub. + # for a Github-based Python project to verify commits using tox. jobs: - github-python-xc-clm - github-tox-verify - github-tox-merge + +- job-group: + name: "{project-name}-gerrit-pypi-jobs" + + # This job group contains all the recommended jobs that should be deployed for + # a Gerrit-based Python project to test, build and deploy a library to PyPI. + + jobs: + - gerrit-pypi-verify + - gerrit-pypi-merge + - gerrit-pypi-release-verify + - gerrit-pypi-release-merge + +- job-group: + name: "{project-name}-github-pypi-jobs" + + # This job group contains all the recommended jobs that should be deployed for + # a Github-based Python project to test, build and deploy a library to PyPI. + + jobs: + - github-pypi-verify + - github-pypi-merge + - github-pypi-release-verify + - github-pypi-release-merge diff --git a/jjb/lf-python-jobs.yaml b/jjb/lf-python-jobs.yaml index 451eb635..de38fa1b 100644 --- a/jjb/lf-python-jobs.yaml +++ b/jjb/lf-python-jobs.yaml @@ -3,6 +3,41 @@ # Macros # ########## +- builder: + name: lf-infra-clm-python + builders: + - inject: + properties-content: "CLM_PROJECT_NAME={clm-project-name}" + - shell: !include-raw-escape: ../shell/nexus-iq-cli.sh + +- builder: + name: lf-infra-pypi-tag-release + builders: + - config-file-provider: + files: + - file-id: sigul-config + variable: SIGUL_CONFIG + - file-id: sigul-password + variable: SIGUL_PASSWORD + - file-id: sigul-pki + variable: SIGUL_PKI + - file-id: signing-pubkey + variable: SIGNING_PUBKEY + - shell: !include-raw: ../shell/sigul-configuration.sh + - shell: !include-raw: ../shell/sigul-install.sh + - shell: !include-raw: ../shell/pypi-tag-release.sh + +- builder: + name: lf-infra-pypi-upload + builders: + - config-file-provider: + files: + - file-id: pypirc + target: "$HOME/.pypirc" + - inject: + properties-content: "REPOSITORY={pypi-repo}" + - shell: !include-raw-escape: ../shell/pypi-upload.sh + - builder: name: lf-infra-tox-install builders: @@ -11,12 +46,11 @@ - shell: !include-raw-escape: ../shell/tox-install.sh - builder: - name: lf-infra-clm-python + name: lf-infra-tox-run builders: - inject: - properties-content: "CLM_PROJECT_NAME={clm-project-name}" - - shell: !include-raw-escape: - - ../shell/nexus-iq-cli.sh + properties-content: "PARALLEL={parallel}" + - shell: !include-raw-escape: ../shell/tox-run.sh #################### # COMMON FUNCTIONS # @@ -229,6 +263,7 @@ mvn-goals: validate mvn-settings: "{mvn-settings}" mvn-version: mvn35 + parallel: true pre-build-script: "# pre-build script goes here" python-version: python2 sonar-mvn-goal: "sonar:sonar" @@ -280,7 +315,8 @@ - lf-infra-tox-install: python-version: "{python-version}" - shell: "{pre-build-script}" - - shell: !include-raw-escape: ../shell/tox-run.sh + - lf-infra-tox-run: + parallel: "{parallel}" - lf-provide-maven-settings: global-settings-file: "{mvn-global-settings}" settings-file: "{mvn-settings}" @@ -393,14 +429,14 @@ disable-job: false git-url: "$GIT_URL/$GERRIT_PROJECT" github-url: "https://github.com" - parallel: true + parallel: false pre-build-script: "# pre-build script goes here" python-version: python2 stream: master submodule-recursive: true submodule-timeout: 10 submodule-disable: false - tox-dir: "" + tox-dir: "." tox-envs: "" gerrit_trigger_file_paths: @@ -432,10 +468,6 @@ - lf-infra-tox-parameters: tox-dir: "{tox-dir}" tox-envs: "{tox-envs}" - - bool: - name: PARALLEL - default: "{parallel}" - description: Tox test type used to configure serial or parallel testing. wrappers: - lf-infra-wrappers: @@ -447,7 +479,8 @@ - lf-infra-tox-install: python-version: "{python-version}" - shell: "{pre-build-script}" - - shell: !include-raw-escape: ../shell/tox-run.sh + - lf-infra-tox-run: + parallel: "{parallel}" publishers: - lf-infra-publish @@ -617,3 +650,446 @@ white-list-target-branches: - "{branch}" included-regions: "{obj:github_included_regions}" + +######## +# PyPI # +######## + +- lf_pypi_common: &lf_pypi_common + name: lf-pypi-common + + ###################### + # Default parameters # + ###################### + + branch: master + build-days-to-keep: 7 + build-timeout: 15 + disable-job: false + dist-binary: true + git-url: "$GIT_URL/$GERRIT_PROJECT" + github-url: "https://github.com" + parallel: false + pre-build-script: "# pre-build script goes here" + python-version: python3 + stream: master + submodule-recursive: true + submodule-timeout: 10 + submodule-disable: false + tox-dir: "." + tox-envs: "" + + gerrit_trigger_file_paths: + - compare-type: ANT + pattern: ".*" + + # github_included_regions MUST match gerrit_trigger_file_paths + github_included_regions: + - ".*" + + parameters: + - lf-infra-parameters: + project: "{project}" + branch: "{branch}" + stream: "{stream}" + - lf-infra-tox-parameters: + tox-dir: "{tox-dir}" + tox-envs: "{tox-envs}" + - bool: + name: BUILD_BDIST_WHEEL + default: "{dist-binary}" + description: "Set to True to build a wheel" + +- lf_pypi_verify_builders: &lf_pypi_verify_builders + name: lf-pypi-verify-builders + + builders: + - lf-infra-pre-build + - lf-infra-tox-install: + python-version: "{python-version}" + - shell: "{pre-build-script}" + - lf-infra-tox-run: + parallel: "{parallel}" + - shell: !include-raw-escape: ../shell/pypi-dist-build.sh + +- lf_pypi_merge_builders: &lf_pypi_merge_builders + name: lf-pypi-merge-builders + + builders: + - lf-infra-pre-build + - lf-infra-tox-install: + python-version: "{python-version}" + - shell: "{pre-build-script}" + - lf-infra-tox-run: + parallel: "{parallel}" + - shell: !include-raw-escape: ../shell/pypi-dist-build.sh + - lf-infra-pypi-upload: + pypi-repo: "{pypi-repo}" + +- lf_pypi_release_verify_builders: &lf_pypi_release_verify_builders + name: lf-pypi-release-verify-builders + + builders: + - lf-infra-pre-build + - lf-infra-tox-install: + python-version: "{python-version}" + - shell: "{pre-build-script}" + - lf-infra-tox-run: + parallel: "{parallel}" + - shell: !include-raw-escape: ../shell/pypi-dist-build.sh + - lf-infra-pypi-tag-release + +- lf_pypi_release_merge_builders: &lf_pypi_release_merge_builders + name: lf-pypi-release-merge-builders + + builders: + - lf-infra-pre-build + - lf-infra-tox-install: + python-version: "{python-version}" + - shell: "{pre-build-script}" + - lf-infra-tox-run: + parallel: "{parallel}" + - shell: !include-raw-escape: ../shell/pypi-dist-build.sh + - lf-infra-pypi-tag-release + - lf-infra-pypi-upload: + pypi-repo: "{pypi-repo}" + +- job-template: + name: "{project-name}-pypi-verify-{stream}" + id: gerrit-pypi-verify + <<: *lf_python_common + # yamllint disable-line rule:key-duplicates + <<: *lf_pypi_common + <<: *lf_pypi_verify_builders + + gerrit_verify_triggers: + - patchset-created-event: + exclude-drafts: true + exclude-trivial-rebase: false + exclude-no-code-change: false + - draft-published-event + - comment-added-contains-event: + comment-contains-value: '^Patch Set\s+\d+:\s+(recheck|reverify)\s*$' + + scm: + - lf-infra-gerrit-scm: + jenkins-ssh-credential: "{jenkins-ssh-credential}" + git-url: "{git-url}" + refspec: "$GERRIT_REFSPEC" + branch: "$GERRIT_BRANCH" + submodule-recursive: "{submodule-recursive}" + submodule-timeout: "{submodule-timeout}" + submodule-disable: "{submodule-disable}" + choosing-strategy: gerrit + + triggers: + - gerrit: + server-name: "{gerrit-server-name}" + trigger-on: "{obj:gerrit_verify_triggers}" + projects: + - project-compare-type: ANT + project-pattern: "{project}" + branches: + - branch-compare-type: ANT + branch-pattern: "**/{branch}" + file-paths: "{obj:gerrit_trigger_file_paths}" + +- job-template: + name: "{project-name}-pypi-verify-{stream}" + id: github-pypi-verify + <<: *lf_python_common + # yamllint disable-line rule:key-duplicates + <<: *lf_pypi_common + <<: *lf_pypi_verify_builders + + properties: + - github: + url: "{github-url}/{github-org}/{project}" + + scm: + - lf-infra-github-scm: + url: "{git-clone-url}{github-org}/{project}" + refspec: "+refs/pull/*:refs/remotes/origin/pr/*" + branch: "$sha1" + submodule-recursive: "{submodule-recursive}" + submodule-timeout: "{submodule-timeout}" + submodule-disable: "{submodule-disable}" + choosing-strategy: default + jenkins-ssh-credential: "{jenkins-ssh-credential}" + + triggers: + - github-pull-request: + trigger-phrase: "^(recheck|reverify)$" + only-trigger-phrase: false + status-context: "PyPI Verify" + permit-all: true + github-hooks: true + white-list-target-branches: + - "{branch}" + included-regions: "{obj:github_included_regions}" + +- job-template: + name: "{project-name}-pypi-merge-{stream}" + id: gerrit-pypi-merge + <<: *lf_python_common + # yamllint disable-line rule:key-duplicates + <<: *lf_pypi_common + <<: *lf_pypi_merge_builders + + pypi-repo: staging + + gerrit_merge_triggers: + - change-merged-event + - comment-added-contains-event: + comment-contains-value: '^Patch Set\s+\d+:\s+remerge\s*$' + + scm: + - lf-infra-gerrit-scm: + jenkins-ssh-credential: "{jenkins-ssh-credential}" + git-url: "{git-url}" + refspec: "$GERRIT_REFSPEC" + branch: "$GERRIT_BRANCH" + submodule-recursive: "{submodule-recursive}" + submodule-timeout: "{submodule-timeout}" + submodule-disable: "{submodule-disable}" + choosing-strategy: gerrit + + triggers: + - gerrit: + server-name: "{gerrit-server-name}" + trigger-on: "{obj:gerrit_merge_triggers}" + projects: + - project-compare-type: ANT + project-pattern: "{project}" + branches: + - branch-compare-type: ANT + branch-pattern: "**/{branch}" + file-paths: "{obj:gerrit_trigger_file_paths}" + +- job-template: + name: "{project-name}-pypi-merge-{stream}" + id: github-pypi-merge + <<: *lf_python_common + # yamllint disable-line rule:key-duplicates + <<: *lf_pypi_common + <<: *lf_pypi_merge_builders + + pypi-repo: staging + + properties: + - github: + url: "{github-url}/{github-org}/{project}" + + scm: + - lf-infra-github-scm: + url: "{git-clone-url}{github-org}/{project}" + refspec: "" + branch: "refs/heads/{branch}" + submodule-recursive: "{submodule-recursive}" + submodule-timeout: "{submodule-timeout}" + submodule-disable: "{submodule-disable}" + choosing-strategy: default + jenkins-ssh-credential: "{jenkins-ssh-credential}" + + triggers: + - github-pull-request: + trigger-phrase: "^remerge$" + only-trigger-phrase: false + status-context: "Merge" + permit-all: true + github-hooks: true + org-list: + - "{github-org}" + white-list: "{obj:github_pr_whitelist}" + admin-list: "{obj:github_pr_admin_list}" + white-list-target-branches: + - "{branch}" + included-regions: "{obj:github_included_regions}" + +- lf_pypi_release_common: &lf_pypi_release_common + name: lf-pypi-release-common + + dist-binary: true + pypi-repo: pypi + use-release-file: true + + gerrit_trigger_file_paths: + - compare-type: REG_EXP + pattern: '(releases\/.*\.yaml|\.releases\/.*\.yaml)' + + # github_included_regions MUST match gerrit_trigger_file_paths + github_included_regions: + - 'releases\/.*\.yaml' + - '.releases\/.*\.yaml' + + parameters: + - lf-infra-parameters: + project: "{project}" + branch: "{branch}" + stream: "{stream}" + - lf-infra-tox-parameters: + tox-dir: "{tox-dir}" + tox-envs: "{tox-envs}" + - bool: + name: BUILD_BDIST_WHEEL + default: "{dist-binary}" + description: "Set to True to build a wheel" + - string: + name: VERSION + default: "" + description: "This is the version, example: 1.0.0" + - bool: + name: USE_RELEASE_FILE + default: "{use-release-file}" + description: "Set to False for job built with parameters" + - bool: + name: DRY_RUN + default: false + description: | + If DRY_RUN is enabled artifacts are not published. + +- job-template: + name: "{project-name}-pypi-release-verify-{stream}" + id: gerrit-pypi-release-verify + <<: *lf_python_common + # yamllint disable-line rule:key-duplicates + <<: *lf_pypi_common + <<: *lf_pypi_release_common + <<: *lf_pypi_release_verify_builders + + gerrit_verify_triggers: + - patchset-created-event: + exclude-drafts: true + exclude-trivial-rebase: false + exclude-no-code-change: false + - draft-published-event + - comment-added-contains-event: + comment-contains-value: '^Patch Set\s+\d+:\s+(recheck|reverify)\s*$' + + scm: + - lf-infra-gerrit-scm: + jenkins-ssh-credential: "{jenkins-ssh-credential}" + git-url: "{git-url}" + refspec: "$GERRIT_REFSPEC" + branch: "$GERRIT_BRANCH" + submodule-recursive: "{submodule-recursive}" + submodule-timeout: "{submodule-timeout}" + submodule-disable: "{submodule-disable}" + choosing-strategy: gerrit + + triggers: + - gerrit: + server-name: "{gerrit-server-name}" + trigger-on: "{obj:gerrit_verify_triggers}" + projects: + - project-compare-type: "ANT" + project-pattern: "{project}" + branches: + - branch-compare-type: "ANT" + branch-pattern: "**" + file-paths: "{obj:gerrit_trigger_file_paths}" + +- job-template: + name: "{project-name}-pypi-release-verify-{stream}" + id: github-pypi-release-verify + <<: *lf_python_common + # yamllint disable-line rule:key-duplicates + <<: *lf_pypi_common + <<: *lf_pypi_release_common + <<: *lf_pypi_release_verify_builders + + properties: + - github: + url: "{github-url}/{github-org}/{project}" + + scm: + - lf-infra-github-scm: + url: "{git-clone-url}{github-org}/{project}" + refspec: "" + branch: "refs/heads/{branch}" + submodule-recursive: "{submodule-recursive}" + submodule-timeout: "{submodule-timeout}" + submodule-disable: "{submodule-disable}" + choosing-strategy: default + jenkins-ssh-credential: "{jenkins-ssh-credential}" + + triggers: + - github-pull-request: + trigger-phrase: "^(recheck|reverify)$" + only-trigger-phrase: false + status-context: "PyPI Release Verify" + permit-all: true + github-hooks: true + white-list-target-branches: + - "{branch}" + included-regions: "{obj:github_included_regions}" + +- job-template: + name: "{project-name}-pypi-release-merge-{stream}" + id: gerrit-pypi-release-merge + <<: *lf_python_common + # yamllint disable-line rule:key-duplicates + <<: *lf_pypi_common + <<: *lf_pypi_release_common + <<: *lf_pypi_release_merge_builders + + gerrit_release_triggers: + - change-merged-event + + scm: + - lf-infra-gerrit-scm: + jenkins-ssh-credential: "{jenkins-ssh-credential}" + git-url: "{git-url}" + refspec: "$GERRIT_REFSPEC" + branch: "$GERRIT_BRANCH" + submodule-recursive: "{submodule-recursive}" + submodule-timeout: "{submodule-timeout}" + submodule-disable: "{submodule-disable}" + choosing-strategy: gerrit + + triggers: + - gerrit: + server-name: "{gerrit-server-name}" + trigger-on: "{obj:gerrit_release_triggers}" + projects: + - project-compare-type: "ANT" + project-pattern: "{project}" + branches: + - branch-compare-type: "ANT" + branch-pattern: "**" + file-paths: "{obj:gerrit_trigger_file_paths}" + +- job-template: + name: "{project-name}-pypi-release-merge-{stream}" + id: github-pypi-release-merge + <<: *lf_python_common + # yamllint disable-line rule:key-duplicates + <<: *lf_pypi_common + <<: *lf_pypi_release_common + <<: *lf_pypi_release_merge_builders + + properties: + - github: + url: "{github-url}/{github-org}/{project}" + + scm: + - lf-infra-github-scm: + url: "{git-clone-url}{github-org}/{project}" + refspec: "" + branch: "refs/heads/{branch}" + submodule-recursive: "{submodule-recursive}" + submodule-timeout: "{submodule-timeout}" + submodule-disable: "{submodule-disable}" + choosing-strategy: default + jenkins-ssh-credential: "{jenkins-ssh-credential}" + + triggers: + - github-pull-request: + trigger-phrase: "^(remerge)$" + only-trigger-phrase: false + status-context: "PyPI Release Merge" + permit-all: true + github-hooks: true + white-list-target-branches: + - "{branch}" + included-regions: "{obj:github_included_regions}" diff --git a/releasenotes/notes/lf-pypi-merge-release-jobs-b729bc2331155364.yaml b/releasenotes/notes/lf-pypi-merge-release-jobs-b729bc2331155364.yaml new file mode 100644 index 00000000..34947a25 --- /dev/null +++ b/releasenotes/notes/lf-pypi-merge-release-jobs-b729bc2331155364.yaml @@ -0,0 +1,13 @@ +--- +features: + - | + New templates to build and push Python source and binary distributions + to a PyPI server. Includes: + ``{project-name}-pypi-verify-{stream}``, ``gerrit-pypi-verify``, + ``github-pypi-verify``, + ``{project-name}-pypi-merge-{stream}``, ``gerrit-pypi-merge``, + ``github-pypi-merge``, + ``{project-name}-pypi-release-verify-{stream}``, + ``gerrit-pypi-release-verify``, ``github-pypi-release-verify``, + ``{project-name}-pypi-release-merge-{stream}``, + ``gerrit-pypi-release-merge``, ``github-pypi-release-merge``, diff --git a/schema/release-pypi-schema.yaml b/schema/release-pypi-schema.yaml new file mode 100644 index 00000000..e56eed69 --- /dev/null +++ b/schema/release-pypi-schema.yaml @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: EPL-1.0 +############################################################################## +# Copyright (c) 2019 The Linux Foundation and others. +# +# All rights reserved. This program and the accompanying materials +# are made available under the terms of the Eclipse Public License v1.0 +# which accompanies this distribution, and is available at +# http://www.eclipse.org/legal/epl-v10.html +############################################################################## +--- +$schema: "http://json-schema.org/schema#" +$id: "https://github.com/lfit/releng-global-jjb/blob/master/release-pypi-schema.yaml" + +required: + - "distribution_type" + - "project" + - "version" + +properties: + distribution_type: + type: "string" + project: + type: "string" + version: + type: "string" diff --git a/shell/pypi-dist-build.sh b/shell/pypi-dist-build.sh new file mode 100644 index 00000000..eb10371b --- /dev/null +++ b/shell/pypi-dist-build.sh @@ -0,0 +1,33 @@ +#!/bin/bash +# SPDX-License-Identifier: EPL-1.0 +############################################################################## +# Copyright (c) 2019 The Linux Foundation and others. +# +# All rights reserved. This program and the accompanying materials +# are made available under the terms of the Eclipse Public License v1.0 +# which accompanies this distribution, and is available at +# http://www.eclipse.org/legal/epl-v10.html +############################################################################## +echo "---> pypi-dist-build.sh" + +# Script to create Python source and binary distributions +# Requires project file "setup.py" + +# Ensure we fail the job if any steps fail. +set -eu -o pipefail + +virtualenv -p python3 /tmp/pypi +PATH=/tmp/pypi/bin:$PATH + +bdist="" +if $BUILD_BDIST_WHEEL; then + echo "INFO: installing wheel to build binary distribution" + pip install wheel + bdist="bdist_wheel" +fi + +echo "INFO: cd to tox-dir $TOX_DIR" +cd "$WORKSPACE/$TOX_DIR" +echo "INFO: creating distributions" +python3 setup.py sdist $bdist +echo "---> pypi-dist-build.sh ends" diff --git a/shell/pypi-tag-release.sh b/shell/pypi-tag-release.sh new file mode 100644 index 00000000..d920c54d --- /dev/null +++ b/shell/pypi-tag-release.sh @@ -0,0 +1,151 @@ +#!/bin/bash +# SPDX-License-Identifier: EPL-1.0 +############################################################################## +# Copyright (c) 2019 The Linux Foundation and others. +# +# All rights reserved. This program and the accompanying materials +# are made available under the terms of the Eclipse Public License v1.0 +# which accompanies this distribution, and is available at +# http://www.eclipse.org/legal/epl-v10.html +############################################################################## +echo "---> pypi-tag-release.sh" + +# Ensure we fail the job if any steps fail. +set -eu -o pipefail + +# Functions. + +set_variables(){ + echo "INFO: Setting variables" + # Verify if using release file or parameters + if $USE_RELEASE_FILE; then + echo "INFO: Checking number of release yaml files" + release_files=$(git diff-tree --no-commit-id -r "$GIT_COMMIT" --name-only -- "releases/" ".releases/") + if (( $(echo "$release_files" | wc -w) != 1 )); then + echo "ERROR: RELEASE FILES: $release_files" + echo "ERROR: Committing multiple release files in the same commit OR rename/amend of existing files is not supported." + exit 1 + else + release_file="$release_files" + echo "INFO: RELEASE FILE: $release_file" + fi + else + echo "INFO: This job is built with parameters, no release file" + release_file="None" + fi + + if [[ -z ${DISTRIBUTION_TYPE:-} ]]; then + echo "INFO: reading DISTRIBUTION_TYPE from file $release_file" + DISTRIBUTION_TYPE="$(niet ".distribution_type" "$release_file")" + fi + if [[ -z ${VERSION:-} ]]; then + echo "INFO: reading VERSION from file $release_file" + VERSION="$(niet ".version" "$release_file")" + fi + + # Display Release Information + printf "\t%-30s\n" RELEASE_ENVIRONMENT_INFO: + printf "\t%-30s %s\n" RELEASE_FILE: $release_file + printf "\t%-30s %s\n" JENKINS_HOSTNAME: $JENKINS_HOSTNAME + printf "\t%-30s %s\n" SILO: $SILO + printf "\t%-30s %s\n" PROJECT: $PROJECT + printf "\t%-30s %s\n" PROJECT-DASHED: ${PROJECT//\//-} + printf "\t%-30s %s\n" DISTRIBUTION_TYPE: $DISTRIBUTION_TYPE + printf "\t%-30s %s\n" VERSION: $VERSION +} + +# needs to run in the repository root +verify_schema(){ + echo "INFO: Fetching schema" + pypi_schema="release-pypi-schema.yaml" + wget https://raw.githubusercontent.com/lfit/releng-global-jjb/master/schema/${pypi_schema} + echo "INFO: Verifying $release_file against schema $pypi_schema" + lftools schema verify "$release_file" "$pypi_schema" + echo "INFO: $release_file passed schema verification" +} + +verify_version(){ + # Verify allowed patterns "v#.#.#" or "#.#.#" aka SemVer + echo "INFO: Verifying version string $VERSION" + allowed_version_regex="^((v?)([0-9]+)\.([0-9]+)\.([0-9]+))$" + if [[ $VERSION =~ $allowed_version_regex ]]; then + echo "INFO: The version $VERSION is a valid semantic version" + else + echo "ERROR: The version $VERSION is not a valid semantic version" + echo "ERROR: Allowed versions are \"v#.#.#\" or \"#.#.#\" aka SemVer" + echo "ERROR: See https://semver.org/ for more details on SemVer" + exit 1 + fi +} + +verify_dist(){ + # Verify all file names in dist folder have the expected version string + dir="$WORKSPACE/$TOX_DIR/dist" + echo "INFO: Listing files in $dir" + ls $dir + echo "INFO: Checking files in $dir for $VERSION" + if unex_files=$(find $dir | grep -v $VERSION | egrep -v "^$dir$"); then + echo "ERROR: found unexpected files: $unex_files" + exit 1 + else + echo "INFO: All file names have expected string ${VERSION}" + fi +} + +# TODO: how to tag Github? +tag_gerrit(){ + echo "INFO: Verifying tag $VERSION in repo" + # Import public signing key + gpg --import "$SIGNING_PUBKEY" + # Fail if tag exists + if git tag -v "$VERSION"; then + echo "ERROR: Repo already tagged" + exit 1 + else + echo "INFO: Repo has not yet been tagged" + fi + echo "INFO: Tagging repo" + git tag -am "${PROJECT//\//-} $VERSION" "$VERSION" + echo "INFO: Signing tag" + sigul --batch -c "$SIGUL_CONFIG" sign-git-tag "$SIGUL_KEY" "$VERSION" < "$SIGUL_PASSWORD" + echo "INFO: Verifying tag" + # may fail due to missing public key + if ! git tag -v "$VERSION"; then + echo "WARN: failed to verify tag, continuing anyhow" + fi + # The verify job also calls this script + if [[ ! $JOB_NAME =~ "merge" ]] ; then + echo "INFO: job is not a merge, skipping push" + else + echo "INFO: configuring Gerrit remote" + gerrit_ssh=$(echo "$GERRIT_URL" | awk -F"/" '{print $3}') + git remote set-url origin "ssh://$RELEASE_USERNAME@$gerrit_ssh:29418/$PROJECT" + git config user.name "$RELEASE_USERNAME" + git config user.email "$RELEASE_EMAIL" + echo -e "Host $gerrit_ssh\n\tStrictHostKeyChecking no\n" >> ~/.ssh/config + chmod 600 ~/.ssh/config + if $DRY_RUN; then + echo "INFO: dry run, skipping push" + else + echo "INFO: pushing tag" + git push origin "$VERSION" + fi + fi +} + +# Main +virtualenv -p python3 /tmp/pypi +PATH=/tmp/pypi/bin:$PATH +pip install lftools jsonschema niet +set_variables +if [[ $DISTRIBUTION_TYPE != "pypi" ]]; then + echo "ERROR: unexpected distribution type $DISTRIBUTION_TYPE" + exit 1 +fi +if $USE_RELEASE_FILE; then + verify_schema +fi +verify_version +verify_dist +tag_gerrit +echo "---> pypi-tag-release.sh ends" diff --git a/shell/pypi-upload.sh b/shell/pypi-upload.sh new file mode 100644 index 00000000..e1ecfdfb --- /dev/null +++ b/shell/pypi-upload.sh @@ -0,0 +1,34 @@ +#!/bin/bash +# SPDX-License-Identifier: EPL-1.0 +############################################################################## +# Copyright (c) 2019 The Linux Foundation and others. +# +# All rights reserved. This program and the accompanying materials +# are made available under the terms of the Eclipse Public License v1.0 +# which accompanies this distribution, and is available at +# http://www.eclipse.org/legal/epl-v10.html +############################################################################## +echo "---> pypi-upload.sh" + +# Script to publish Python distributions from a folder +# to the PyPI repository in $REPOSITORY which must be a +# key in the .pypirc file + +# Ensure we fail the job if any steps fail. +set -eu -o pipefail + +virtualenv -p python3 /tmp/pypi +PATH=/tmp/pypi/bin:$PATH + +pip install twine +echo "INFO: cd to tox-dir $TOX_DIR" +cd "$WORKSPACE/$TOX_DIR" +cmd="twine upload -r $REPOSITORY dist/*" +if $DRY_RUN; then + echo "INFO: dry-run is set, echoing command only" + echo $cmd +else + echo "INFO: uploading distributions" + $cmd +fi +echo "---> pypi-upload.sh ends"