.jjb-test/expected-xml/gerrit-maven-maven-javadoc-publish-master

   1 <?xml version="1.0" encoding="utf-8"?>
   2 <project>
   3   <jdk>openjdk8</jdk>
   4   <actions/>
   5   <description>&lt;!-- Managed by Jenkins Job Builder --&gt;</description>
   6   <keepDependencies>false</keepDependencies>
   7   <blockBuildWhenDownstreamBuilding>false</blockBuildWhenDownstreamBuilding>
   8   <blockBuildWhenUpstreamBuilding>false</blockBuildWhenUpstreamBuilding>
   9   <concurrentBuild>false</concurrentBuild>
  10   <assignedNode>build-vm</assignedNode>
  11   <canRoam>false</canRoam>
  12   <properties>
  13     <jenkins.model.BuildDiscarderProperty>
  14       <strategy class="hudson.tasks.LogRotator">
  15         <daysToKeep>30</daysToKeep>
  16         <numToKeep>-1</numToKeep>
  17         <artifactDaysToKeep>-1</artifactDaysToKeep>
  18         <artifactNumToKeep>0</artifactNumToKeep>
  19       </strategy>
  20     </jenkins.model.BuildDiscarderProperty>
  21     <hudson.model.ParametersDefinitionProperty>
  22       <parameterDefinitions>
  23         <hudson.model.StringParameterDefinition>
  24           <name>PROJECT</name>
  25           <description>Parameter to identify a Gerrit project. This is typically the
  26 project repo path as exists in Gerrit.
  27 For example: ofextensions/circuitsw
  28 </description>
  29           <defaultValue>releng/ciman</defaultValue>
  30         </hudson.model.StringParameterDefinition>
  31         <hudson.model.StringParameterDefinition>
  32           <name>STREAM</name>
  33           <description>Stream is often set to the same name as 'branch' but can
  34 sometimes be used as a name representing a project's release code
  35 name.
  36 </description>
  37           <defaultValue>master</defaultValue>
  38         </hudson.model.StringParameterDefinition>
  39         <hudson.model.StringParameterDefinition>
  40           <name>GERRIT_PROJECT</name>
  41           <description>Parameter to identify Gerrit project. This is typically the
  42 project repo path as exists in Gerrit.
  43 For example: ofextensions/circuitsw
  44
  45 Note that Gerrit will override this parameter automatically if a
  46 job is triggered by Gerrit.
  47 </description>
  48           <defaultValue>releng/ciman</defaultValue>
  49         </hudson.model.StringParameterDefinition>
  50         <hudson.model.StringParameterDefinition>
  51           <name>GERRIT_BRANCH</name>
  52           <description>Parameter to identify a Gerrit branch.
  53
  54 Note that Gerrit will override this parameter automatically if a
  55 job is triggered by Gerrit.
  56 </description>
  57           <defaultValue>master</defaultValue>
  58         </hudson.model.StringParameterDefinition>
  59         <hudson.model.StringParameterDefinition>
  60           <name>GERRIT_REFSPEC</name>
  61           <description>Parameter to identify a refspec when pulling from Gerrit.
  62
  63 Note that Gerrit will override this parameter automatically if a
  64 job is triggered by Gerrit.
  65 </description>
  66           <defaultValue>refs/heads/master</defaultValue>
  67         </hudson.model.StringParameterDefinition>
  68         <hudson.model.StringParameterDefinition>
  69           <name>LFTOOLS_VERSION</name>
  70           <description>Version of lftools to install. Can be a specific version like
  71 '0.6.0' or a PEP-440 definition.
  72 https://www.python.org/dev/peps/pep-0440/
  73 For example '&lt;1.0.0' or '&gt;=1.0.0,&lt;2.0.0'.
  74 </description>
  75           <defaultValue>&lt;1.0.0</defaultValue>
  76         </hudson.model.StringParameterDefinition>
  77         <hudson.model.StringParameterDefinition>
  78           <name>M2_HOME</name>
  79           <description>Maven selector to be used by shell scripts</description>
  80           <defaultValue>/w/tools/hudson.tasks.Maven_MavenInstallation/mvn33</defaultValue>
  81         </hudson.model.StringParameterDefinition>
  82         <hudson.model.StringParameterDefinition>
  83           <name>MAVEN_OPTS</name>
  84           <description>Maven Java opts. Example: -Xmx1024m -XX:MaxPermSize=256m
  85 </description>
  86           <defaultValue/>
  87         </hudson.model.StringParameterDefinition>
  88         <hudson.model.StringParameterDefinition>
  89           <name>MAVEN_PARAMS</name>
  90           <description>Maven parameters to pass to the mvn command.
  91 </description>
  92           <defaultValue/>
  93         </hudson.model.StringParameterDefinition>
  94         <hudson.model.StringParameterDefinition>
  95           <name>MVN</name>
  96           <description>Maven selector to be used by shell scripts</description>
  97           <defaultValue>/w/tools/hudson.tasks.Maven_MavenInstallation/mvn33/bin/mvn</defaultValue>
  98         </hudson.model.StringParameterDefinition>
  99         <hudson.model.StringParameterDefinition>
 100           <name>STAGING_PROFILE_ID</name>
 101           <description>Nexus staging profile ID.
 102 </description>
 103           <defaultValue>uuddlrlrba</defaultValue>
 104         </hudson.model.StringParameterDefinition>
 105       </parameterDefinitions>
 106     </hudson.model.ParametersDefinitionProperty>
 107   </properties>
 108   <scm class="hudson.plugins.git.GitSCM">
 109     <configVersion>2</configVersion>
 110     <userRemoteConfigs>
 111       <hudson.plugins.git.UserRemoteConfig>
 112         <name>origin</name>
 113         <refspec/>
 114         <url>$GIT_URL/$GERRIT_PROJECT</url>
 115         <credentialsId>test-credential</credentialsId>
 116       </hudson.plugins.git.UserRemoteConfig>
 117     </userRemoteConfigs>
 118     <branches>
 119       <hudson.plugins.git.BranchSpec>
 120         <name>refs/heads/master</name>
 121       </hudson.plugins.git.BranchSpec>
 122     </branches>
 123     <excludedUsers/>
 124     <buildChooser class="hudson.plugins.git.util.DefaultBuildChooser"/>
 125     <doGenerateSubmoduleConfigurations>false</doGenerateSubmoduleConfigurations>
 126     <authorOrCommitter>false</authorOrCommitter>
 127     <wipeOutWorkspace>true</wipeOutWorkspace>
 128     <pruneBranches>false</pruneBranches>
 129     <remotePoll>false</remotePoll>
 130     <gitTool>Default</gitTool>
 131     <submoduleCfg class="list"/>
 132     <relativeTargetDir/>
 133     <reference/>
 134     <gitConfigName/>
 135     <gitConfigEmail/>
 136     <skipTag>true</skipTag>
 137     <scmName/>
 138     <useShallowClone>false</useShallowClone>
 139     <ignoreNotifyCommit>false</ignoreNotifyCommit>
 140     <extensions>
 141       <hudson.plugins.git.extensions.impl.SubmoduleOption>
 142         <disableSubmodules>false</disableSubmodules>
 143         <recursiveSubmodules>true</recursiveSubmodules>
 144         <trackingSubmodules>false</trackingSubmodules>
 145         <reference/>
 146         <timeout>10</timeout>
 147       </hudson.plugins.git.extensions.impl.SubmoduleOption>
 148       <hudson.plugins.git.extensions.impl.WipeWorkspace/>
 149     </extensions>
 150   </scm>
 151   <triggers class="vector">
 152     <com.sonyericsson.hudson.plugins.gerrit.trigger.hudsontrigger.GerritTrigger>
 153       <spec/>
 154       <gerritProjects>
 155         <com.sonyericsson.hudson.plugins.gerrit.trigger.hudsontrigger.data.GerritProject>
 156           <compareType>ANT</compareType>
 157           <pattern>releng/ciman</pattern>
 158           <branches>
 159             <com.sonyericsson.hudson.plugins.gerrit.trigger.hudsontrigger.data.Branch>
 160               <compareType>ANT</compareType>
 161               <pattern>**/master</pattern>
 162             </com.sonyericsson.hudson.plugins.gerrit.trigger.hudsontrigger.data.Branch>
 163           </branches>
 164           <disableStrictForbiddenFileVerification>false</disableStrictForbiddenFileVerification>
 165         </com.sonyericsson.hudson.plugins.gerrit.trigger.hudsontrigger.data.GerritProject>
 166       </gerritProjects>
 167       <skipVote>
 168         <onSuccessful>false</onSuccessful>
 169         <onFailed>false</onFailed>
 170         <onUnstable>false</onUnstable>
 171         <onNotBuilt>false</onNotBuilt>
 172       </skipVote>
 173       <silentMode>false</silentMode>
 174       <silentStartMode>false</silentStartMode>
 175       <escapeQuotes>true</escapeQuotes>
 176       <noNameAndEmailParameters>false</noNameAndEmailParameters>
 177       <readableMessage>false</readableMessage>
 178       <dependencyJobsNames/>
 179       <notificationLevel/>
 180       <dynamicTriggerConfiguration>False</dynamicTriggerConfiguration>
 181       <triggerConfigURL/>
 182       <allowTriggeringUnreviewedPatches>false</allowTriggeringUnreviewedPatches>
 183       <triggerOnEvents>
 184         <com.sonyericsson.hudson.plugins.gerrit.trigger.hudsontrigger.events.PluginChangeMergedEvent/>
 185         <com.sonyericsson.hudson.plugins.gerrit.trigger.hudsontrigger.events.PluginCommentAddedContainsEvent>
 186           <commentAddedCommentContains>remerge$</commentAddedCommentContains>
 187         </com.sonyericsson.hudson.plugins.gerrit.trigger.hudsontrigger.events.PluginCommentAddedContainsEvent>
 188       </triggerOnEvents>
 189       <buildStartMessage/>
 190       <buildFailureMessage/>
 191       <buildSuccessfulMessage/>
 192       <buildUnstableMessage/>
 193       <buildNotBuiltMessage/>
 194       <buildUnsuccessfulFilepath/>
 195       <customUrl/>
 196       <serverName>test-server</serverName>
 197     </com.sonyericsson.hudson.plugins.gerrit.trigger.hudsontrigger.GerritTrigger>
 198   </triggers>
 199   <builders>
 200     <hudson.tasks.Shell>
 201       <command>echo &quot;quiet=on&quot; &gt; &quot;$HOME/.wgetrc&quot;</command>
 202     </hudson.tasks.Shell>
 203     <hudson.tasks.Maven>
 204       <targets>--version</targets>
 205       <properties/>
 206       <mavenName>mvn33</mavenName>
 207       <usePrivateRepository>false</usePrivateRepository>
 208       <settings class="jenkins.mvn.DefaultSettingsProvider"/>
 209       <globalSettings class="jenkins.mvn.DefaultGlobalSettingsProvider"/>
 210     </hudson.tasks.Maven>
 211     <hudson.tasks.Shell>
 212       <command>rm &quot;$HOME/.wgetrc&quot;</command>
 213     </hudson.tasks.Shell>
 214     <org.jenkinsci.plugins.configfiles.builder.ConfigFileBuildStep plugin="config-file-provider">
 215       <managedFiles>
 216         <org.jenkinsci.plugins.configfiles.buildwrapper.ManagedFile>
 217           <fileId>global-settings</fileId>
 218           <targetLocation/>
 219           <variable>GLOBAL_SETTINGS_FILE</variable>
 220         </org.jenkinsci.plugins.configfiles.buildwrapper.ManagedFile>
 221         <org.jenkinsci.plugins.configfiles.buildwrapper.ManagedFile>
 222           <fileId>gerrit-maven-project-settings</fileId>
 223           <targetLocation/>
 224           <variable>SETTINGS_FILE</variable>
 225         </org.jenkinsci.plugins.configfiles.buildwrapper.ManagedFile>
 226       </managedFiles>
 227     </org.jenkinsci.plugins.configfiles.builder.ConfigFileBuildStep>
 228     <EnvInjectBuilder>
 229       <info>
 230         <propertiesContent>SERVER_ID=project-site</propertiesContent>
 231       </info>
 232     </EnvInjectBuilder>
 233     <hudson.tasks.Shell>
 234       <command>#!/bin/bash
 235 # SPDX-License-Identifier: EPL-1.0
 236 ##############################################################################
 237 # Copyright (c) 2017 The Linux Foundation and others.
 238 #
 239 # All rights reserved. This program and the accompanying materials
 240 # are made available under the terms of the Eclipse Public License v1.0
 241 # which accompanies this distribution, and is available at
 242 # http://www.eclipse.org/legal/epl-v10.html
 243 ##############################################################################
 244 echo &quot;---&gt; create-netrc.sh&quot;
 245
 246 # Ensure we fail the job if any steps fail.
 247 set -eu -o pipefail
 248
 249 NEXUS_URL=&quot;${NEXUS_URL:-$NEXUSPROXY}&quot;
 250 CREDENTIAL=$(xmlstarlet sel -N &quot;x=http://maven.apache.org/SETTINGS/1.0.0&quot; \
 251     -t -m &quot;/x:settings/x:servers/x:server[x:id='${SERVER_ID}']&quot; \
 252     -v x:username -o &quot;:&quot; -v x:password \
 253     &quot;$SETTINGS_FILE&quot;)
 254
 255 machine=$(echo &quot;$NEXUS_URL&quot; | awk -F/ '{print $3}')
 256 user=$(echo &quot;$CREDENTIAL&quot; | cut -f1 -d:)
 257 pass=$(echo &quot;$CREDENTIAL&quot; | cut -f2 -d:)
 258
 259 echo &quot;machine $machine login $user password $pass&quot; &gt; ~/.netrc
 260 </command>
 261     </hudson.tasks.Shell>
 262     <EnvInjectBuilder>
 263       <info>
 264         <propertiesContent>DEPLOY_PATH=org.example.project/$STREAM</propertiesContent>
 265       </info>
 266     </EnvInjectBuilder>
 267     <hudson.tasks.Shell>
 268       <command>#!/bin/bash
 269 # SPDX-License-Identifier: EPL-1.0
 270 ##############################################################################
 271 # Copyright (c) 2017 The Linux Foundation and others.
 272 #
 273 # All rights reserved. This program and the accompanying materials
 274 # are made available under the terms of the Eclipse Public License v1.0
 275 # which accompanies this distribution, and is available at
 276 # http://www.eclipse.org/legal/epl-v10.html
 277 ##############################################################################
 278
 279 # This file contains a list of variables that are generally useful in many
 280 # scripts. It is meant to be sourced in other scripts so that the variables can
 281 # be called.
 282
 283 MAVEN_OPTIONS=&quot;$(echo --show-version \
 284     --batch-mode \
 285     -Djenkins \
 286     -Dorg.slf4j.simpleLogger.log.org.apache.maven.cli.transfer.Slf4jMavenTransferListener=warn \
 287     -Dmaven.repo.local=/tmp/r \
 288     -Dorg.ops4j.pax.url.mvn.localRepository=/tmp/r)&quot;
 289 echo &quot;$MAVEN_OPTIONS&quot;
 290
 291 #!/bin/bash
 292 # SPDX-License-Identifier: EPL-1.0
 293 ##############################################################################
 294 # Copyright (c) 2017 The Linux Foundation and others.
 295 #
 296 # All rights reserved. This program and the accompanying materials
 297 # are made available under the terms of the Eclipse Public License v1.0
 298 # which accompanies this distribution, and is available at
 299 # http://www.eclipse.org/legal/epl-v10.html
 300 ##############################################################################
 301
 302 # Generates javadoc in a Maven project.
 303
 304 # DO NOT enable -u because $MAVEN_PARAMS and $MAVEN_OPTIONS could be unbound.
 305 # Ensure we fail the job if any steps fail.
 306 set -e -o pipefail
 307 set +u
 308
 309 JAVADOC_DIR=&quot;$WORKSPACE/archives/javadoc&quot;
 310 mkdir -p &quot;$WORKSPACE/archives&quot;
 311
 312 export MAVEN_OPTS
 313
 314 # Disable SC2086 because we want to allow word splitting for $MAVEN_* parameters.
 315 # shellcheck disable=SC2086
 316 $MVN clean javadoc:aggregate \
 317     --global-settings &quot;$GLOBAL_SETTINGS_FILE&quot; \
 318     --settings &quot;$SETTINGS_FILE&quot; \
 319     $MAVEN_PARAMS $MAVEN_OPTIONS
 320
 321 mv &quot;$WORKSPACE/target/site/apidocs&quot; &quot;$JAVADOC_DIR&quot;
 322
 323 #!/bin/bash
 324 # SPDX-License-Identifier: EPL-1.0
 325 ##############################################################################
 326 # Copyright (c) 2017 The Linux Foundation and others.
 327 #
 328 # All rights reserved. This program and the accompanying materials
 329 # are made available under the terms of the Eclipse Public License v1.0
 330 # which accompanies this distribution, and is available at
 331 # http://www.eclipse.org/legal/epl-v10.html
 332 ##############################################################################
 333 echo &quot;---&gt; lftools-install.sh&quot;
 334
 335 # Script to install lftools via a version passed in via lf-infra-parameters
 336 #
 337 # Required parameters:
 338 #
 339 #     LFTOOLS_VERSION: Passed in via lf-infra-parameters configuration. Can be
 340 #                      set to a strict version number like '1.2.3' or using
 341 #                      PEP-440 definitions.
 342 #
 343 #                      Examples:
 344 #                          &lt;1.0.0
 345 #                          &gt;=1.0.0,&lt;2.0.0
 346 #
 347 # By default a released version of lftools should always be used.
 348 # The purpose of the 2 variables below is so that lftools devs can test
 349 # unreleased versions of lftools. There are 2 methods to install a dev version
 350 # of lftools:
 351 #
 352 #     1) gerrit patch: Used to test a patch that has not yet been merged.
 353 #                      To do this set something like this:
 354 #                          LFTOOLS_MODE=gerrit
 355 #                          LFTOOLS_REFSPEC=refs/changes/96/5296/7
 356 #
 357 #     2) git branch: Used to install an lftools version from a specific branch.
 358 #                    To use this set the variables as follows:
 359 #                          LFTOOLS_MODE=git
 360 #                          LFTOOLS_REFSPEC=master
 361 #
 362 #     3) release : The intended use case and default setting.
 363 #                  Set LFTOOLS_MODE=release, in this case LFTOOLS_REFSPEC is unused.
 364
 365 LFTOOLS_MODE=release  # release | git | gerrit
 366 LFTOOLS_REFSPEC=master
 367
 368 # Ensure we fail the job if any steps fail.
 369 # DO NOT set -u as virtualenv's activate script has unbound variables
 370 set -e -o pipefail
 371
 372 virtualenv --quiet &quot;/tmp/v/lftools&quot;
 373 # shellcheck source=/tmp/v/lftools/bin/activate disable=SC1091
 374 source &quot;/tmp/v/lftools/bin/activate&quot;
 375 pip install --quiet --upgrade pip
 376
 377 case $LFTOOLS_MODE in
 378     gerrit)
 379         git clone https://gerrit.linuxfoundation.org/infra/releng/lftools.git /tmp/lftools
 380         pushd /tmp/lftools
 381         git fetch origin &quot;$LFTOOLS_REFSPEC&quot;
 382         git checkout FETCH_HEAD
 383         pip install --quiet --upgrade -r requirements.txt
 384         pip install --quiet --upgrade -e .
 385         popd
 386         ;;
 387
 388     git)
 389         pip install --quiet --upgrade git+https://gerrit.linuxfoundation.org/infra/releng/lftools.git@&quot;$BRANCH&quot;
 390         ;;
 391
 392     release)
 393         if [[ $LFTOOLS_VERSION =~ ^[0-9] ]]; then
 394             LFTOOLS_VERSION=&quot;==$LFTOOLS_VERSION&quot;
 395         fi
 396
 397         pip install --quiet --upgrade &quot;lftools${LFTOOLS_VERSION}&quot;
 398         ;;
 399 esac
 400
 401 lftools --version
 402
 403 # pipdeptree prints out a lot of information because lftools pulls in many
 404 # dependencies. Let's only print it if we want to debug.
 405 # echo &quot;----&gt; Pip Dependency Tree&quot;
 406 # pip install --quiet --upgrade pipdeptree
 407 # pipdeptree
 408
 409 #!/bin/bash
 410 # SPDX-License-Identifier: EPL-1.0
 411 ##############################################################################
 412 # Copyright (c) 2017 The Linux Foundation and others.
 413 #
 414 # All rights reserved. This program and the accompanying materials
 415 # are made available under the terms of the Eclipse Public License v1.0
 416 # which accompanies this distribution, and is available at
 417 # http://www.eclipse.org/legal/epl-v10.html
 418 ##############################################################################
 419
 420 # Publishes javadoc to a Maven project.
 421
 422 # DO NOT enable -u because $MAVEN_PARAMS and $MAVEN_OPTIONS could be unbound.
 423 # Ensure we fail the job if any steps fail.
 424 set -e -o pipefail
 425 set +u
 426
 427 JAVADOC_DIR=&quot;$WORKSPACE/archives/javadoc&quot;
 428
 429 pushd &quot;$JAVADOC_DIR&quot;
 430 zip -r &quot;$WORKSPACE/javadoc.zip&quot; .
 431 popd
 432
 433 lftools deploy nexus-zip &quot;$NEXUS_URL&quot; &quot;javadoc&quot; &quot;$DEPLOY_PATH&quot; &quot;$WORKSPACE/javadoc.zip&quot;
 434 </command>
 435     </hudson.tasks.Shell>
 436     <hudson.tasks.Shell>
 437       <command>#!/bin/bash
 438 set +e  # DO NOT cause build failure if any of the rm calls fail.
 439
 440 rm &quot;$GLOBAL_SETTINGS_FILE&quot; &quot;$SETTINGS_FILE&quot;
 441
 442 # In some cases we use the lf-provide-maven-settings macro to produce
 443 # a &quot;$HOME/.netrc&quot; file containing credentials. Remove that file here
 444 # too if it exists.
 445 rm &quot;$HOME/.netrc&quot;
 446
 447 # DO NOT fail build if any of the above lines fail.
 448 exit 0
 449 </command>
 450     </hudson.tasks.Shell>
 451   </builders>
 452   <publishers>
 453     <org.jenkinsci.plugins.postbuildscript.PostBuildScript>
 454       <buildSteps>
 455         <hudson.tasks.Shell>
 456           <command>#!/bin/bash
 457 # SPDX-License-Identifier: EPL-1.0
 458 ##############################################################################
 459 # Copyright (c) 2017 The Linux Foundation and others.
 460 #
 461 # All rights reserved. This program and the accompanying materials
 462 # are made available under the terms of the Eclipse Public License v1.0
 463 # which accompanies this distribution, and is available at
 464 # http://www.eclipse.org/legal/epl-v10.html
 465 ##############################################################################
 466 echo &quot;---&gt; sysstat.sh&quot;
 467 set +e  # DON'T fail build if script fails.
 468
 469 OS=$(facter operatingsystem)
 470 case &quot;$OS&quot; in
 471     Ubuntu)
 472         SYSSTAT_PATH=&quot;/var/log/sysstat&quot;
 473
 474         # Dont run the script when systat is not enabled by default
 475         if ! grep --quiet 'ENABLED=&quot;true&quot;' &quot;/etc/default/sysstat&quot;; then
 476             exit 0
 477         fi
 478     ;;
 479     CentOS|RedHat)
 480         SYSSTAT_PATH=&quot;/var/log/sa&quot;
 481     ;;
 482     *)
 483         # nothing to do
 484         exit 0
 485     ;;
 486 esac
 487
 488 SAR_DIR=&quot;$WORKSPACE/archives/sar-reports&quot;
 489 mkdir -p &quot;$SAR_DIR&quot;
 490 cp &quot;$SYSSTAT_PATH/&quot;* &quot;$_&quot;
 491 # convert sar data to ascii format
 492 while IFS=&quot;&quot; read -r s
 493 do
 494     [ -f &quot;$s&quot; ] &amp;&amp; LC_TIME=POSIX sar -A -f &quot;$s&quot; &gt; &quot;$SAR_DIR/sar${s//[!0-9]/}&quot;
 495 done &lt; &lt;(find &quot;$SYSSTAT_PATH&quot; -name &quot;sa[0-9]*&quot; || true)
 496
 497 # DON'T fail build if script fails.
 498 exit 0
 499 </command>
 500         </hudson.tasks.Shell>
 501         <org.jenkinsci.plugins.configfiles.builder.ConfigFileBuildStep plugin="config-file-provider">
 502           <managedFiles>
 503             <org.jenkinsci.plugins.configfiles.buildwrapper.ManagedFile>
 504               <fileId>jenkins-log-archives-settings</fileId>
 505               <targetLocation/>
 506               <variable>SETTINGS_FILE</variable>
 507             </org.jenkinsci.plugins.configfiles.buildwrapper.ManagedFile>
 508           </managedFiles>
 509         </org.jenkinsci.plugins.configfiles.builder.ConfigFileBuildStep>
 510         <EnvInjectBuilder>
 511           <info>
 512             <propertiesContent>SERVER_ID=logs</propertiesContent>
 513           </info>
 514         </EnvInjectBuilder>
 515         <hudson.tasks.Shell>
 516           <command>#!/bin/bash
 517 # SPDX-License-Identifier: EPL-1.0
 518 ##############################################################################
 519 # Copyright (c) 2017 The Linux Foundation and others.
 520 #
 521 # All rights reserved. This program and the accompanying materials
 522 # are made available under the terms of the Eclipse Public License v1.0
 523 # which accompanies this distribution, and is available at
 524 # http://www.eclipse.org/legal/epl-v10.html
 525 ##############################################################################
 526 echo &quot;---&gt; create-netrc.sh&quot;
 527
 528 # Ensure we fail the job if any steps fail.
 529 set -eu -o pipefail
 530
 531 NEXUS_URL=&quot;${NEXUS_URL:-$NEXUSPROXY}&quot;
 532 CREDENTIAL=$(xmlstarlet sel -N &quot;x=http://maven.apache.org/SETTINGS/1.0.0&quot; \
 533     -t -m &quot;/x:settings/x:servers/x:server[x:id='${SERVER_ID}']&quot; \
 534     -v x:username -o &quot;:&quot; -v x:password \
 535     &quot;$SETTINGS_FILE&quot;)
 536
 537 machine=$(echo &quot;$NEXUS_URL&quot; | awk -F/ '{print $3}')
 538 user=$(echo &quot;$CREDENTIAL&quot; | cut -f1 -d:)
 539 pass=$(echo &quot;$CREDENTIAL&quot; | cut -f2 -d:)
 540
 541 echo &quot;machine $machine login $user password $pass&quot; &gt; ~/.netrc
 542 </command>
 543         </hudson.tasks.Shell>
 544         <hudson.tasks.Shell>
 545           <command>#!/bin/bash
 546 # SPDX-License-Identifier: EPL-1.0
 547 ##############################################################################
 548 # Copyright (c) 2017 The Linux Foundation and others.
 549 #
 550 # All rights reserved. This program and the accompanying materials
 551 # are made available under the terms of the Eclipse Public License v1.0
 552 # which accompanies this distribution, and is available at
 553 # http://www.eclipse.org/legal/epl-v10.html
 554 ##############################################################################
 555 echo &quot;---&gt; lftools-install.sh&quot;
 556
 557 # Script to install lftools via a version passed in via lf-infra-parameters
 558 #
 559 # Required parameters:
 560 #
 561 #     LFTOOLS_VERSION: Passed in via lf-infra-parameters configuration. Can be
 562 #                      set to a strict version number like '1.2.3' or using
 563 #                      PEP-440 definitions.
 564 #
 565 #                      Examples:
 566 #                          &lt;1.0.0
 567 #                          &gt;=1.0.0,&lt;2.0.0
 568 #
 569 # By default a released version of lftools should always be used.
 570 # The purpose of the 2 variables below is so that lftools devs can test
 571 # unreleased versions of lftools. There are 2 methods to install a dev version
 572 # of lftools:
 573 #
 574 #     1) gerrit patch: Used to test a patch that has not yet been merged.
 575 #                      To do this set something like this:
 576 #                          LFTOOLS_MODE=gerrit
 577 #                          LFTOOLS_REFSPEC=refs/changes/96/5296/7
 578 #
 579 #     2) git branch: Used to install an lftools version from a specific branch.
 580 #                    To use this set the variables as follows:
 581 #                          LFTOOLS_MODE=git
 582 #                          LFTOOLS_REFSPEC=master
 583 #
 584 #     3) release : The intended use case and default setting.
 585 #                  Set LFTOOLS_MODE=release, in this case LFTOOLS_REFSPEC is unused.
 586
 587 LFTOOLS_MODE=release  # release | git | gerrit
 588 LFTOOLS_REFSPEC=master
 589
 590 # Ensure we fail the job if any steps fail.
 591 # DO NOT set -u as virtualenv's activate script has unbound variables
 592 set -e -o pipefail
 593
 594 virtualenv --quiet &quot;/tmp/v/lftools&quot;
 595 # shellcheck source=/tmp/v/lftools/bin/activate disable=SC1091
 596 source &quot;/tmp/v/lftools/bin/activate&quot;
 597 pip install --quiet --upgrade pip
 598
 599 case $LFTOOLS_MODE in
 600     gerrit)
 601         git clone https://gerrit.linuxfoundation.org/infra/releng/lftools.git /tmp/lftools
 602         pushd /tmp/lftools
 603         git fetch origin &quot;$LFTOOLS_REFSPEC&quot;
 604         git checkout FETCH_HEAD
 605         pip install --quiet --upgrade -r requirements.txt
 606         pip install --quiet --upgrade -e .
 607         popd
 608         ;;
 609
 610     git)
 611         pip install --quiet --upgrade git+https://gerrit.linuxfoundation.org/infra/releng/lftools.git@&quot;$BRANCH&quot;
 612         ;;
 613
 614     release)
 615         if [[ $LFTOOLS_VERSION =~ ^[0-9] ]]; then
 616             LFTOOLS_VERSION=&quot;==$LFTOOLS_VERSION&quot;
 617         fi
 618
 619         pip install --quiet --upgrade &quot;lftools${LFTOOLS_VERSION}&quot;
 620         ;;
 621 esac
 622
 623 lftools --version
 624
 625 # pipdeptree prints out a lot of information because lftools pulls in many
 626 # dependencies. Let's only print it if we want to debug.
 627 # echo &quot;----&gt; Pip Dependency Tree&quot;
 628 # pip install --quiet --upgrade pipdeptree
 629 # pipdeptree
 630
 631 #!/bin/bash
 632 # SPDX-License-Identifier: EPL-1.0
 633 ##############################################################################
 634 # Copyright (c) 2017 The Linux Foundation and others.
 635 #
 636 # All rights reserved. This program and the accompanying materials
 637 # are made available under the terms of the Eclipse Public License v1.0
 638 # which accompanies this distribution, and is available at
 639 # http://www.eclipse.org/legal/epl-v10.html
 640 ##############################################################################
 641 echo &quot;---&gt; logs-deploy.sh&quot;
 642
 643 # Ensure we fail the job if any steps fail.
 644 set -eu -o pipefail
 645
 646 set -x  # Trace commands for this script to make debugging easier.
 647
 648 ARCHIVE_ARTIFACTS=&quot;${ARCHIVE_ARTIFACTS:-}&quot;
 649 LOGS_SERVER=&quot;${LOGS_SERVER:-None}&quot;
 650
 651 if [ &quot;${LOGS_SERVER}&quot; == 'None' ]
 652 then
 653     set +x # Disable trace since we no longer need it
 654
 655     echo &quot;WARNING: Logging server not set&quot;
 656 else
 657     NEXUS_URL=&quot;${NEXUS_URL:-$NEXUSPROXY}&quot;
 658     NEXUS_PATH=&quot;${SILO}/${JENKINS_HOSTNAME}/${JOB_NAME}/${BUILD_NUMBER}&quot;
 659     BUILD_URL=&quot;${BUILD_URL}&quot;
 660
 661     lftools deploy archives -p &quot;$ARCHIVE_ARTIFACTS&quot; &quot;$NEXUS_URL&quot; &quot;$NEXUS_PATH&quot; &quot;$WORKSPACE&quot;
 662     lftools deploy logs &quot;$NEXUS_URL&quot; &quot;$NEXUS_PATH&quot; &quot;$BUILD_URL&quot;
 663
 664     set +x  # Disable trace since we no longer need it.
 665
 666     echo &quot;Build logs: &lt;a href=\&quot;$LOGS_SERVER/$NEXUS_PATH\&quot;&gt;$LOGS_SERVER/$NEXUS_PATH&lt;/a&gt;&quot;
 667 fi
 668 </command>
 669         </hudson.tasks.Shell>
 670         <hudson.tasks.Shell>
 671           <command>#!/bin/bash
 672 # SPDX-License-Identifier: EPL-1.0
 673 ##############################################################################
 674 # Copyright (c) 2017 The Linux Foundation and others.
 675 #
 676 # All rights reserved. This program and the accompanying materials
 677 # are made available under the terms of the Eclipse Public License v1.0
 678 # which accompanies this distribution, and is available at
 679 # http://www.eclipse.org/legal/epl-v10.html
 680 ##############################################################################
 681
 682 # Clear log credential files
 683 rm &quot;$SETTINGS_FILE&quot;
 684 rm ~/.netrc
 685 </command>
 686         </hudson.tasks.Shell>
 687         <hudson.plugins.descriptionsetter.DescriptionSetterBuilder>
 688           <regexp>^Build logs: .*</regexp>
 689         </hudson.plugins.descriptionsetter.DescriptionSetterBuilder>
 690       </buildSteps>
 691       <scriptOnlyIfSuccess>false</scriptOnlyIfSuccess>
 692       <scriptOnlyIfFailure>false</scriptOnlyIfFailure>
 693       <markBuildUnstable>false</markBuildUnstable>
 694     </org.jenkinsci.plugins.postbuildscript.PostBuildScript>
 695     <hudson.plugins.ws__cleanup.WsCleanup plugin="ws-cleanup">
 696       <patterns>
 697         <hudson.plugins.ws__cleanup.Pattern>
 698           <pattern>**/*.jenkins-trigger</pattern>
 699           <type>EXCLUDE</type>
 700         </hudson.plugins.ws__cleanup.Pattern>
 701       </patterns>
 702       <deleteDirs>false</deleteDirs>
 703       <cleanupMatrixParent>false</cleanupMatrixParent>
 704       <externalDelete/>
 705       <cleanWhenSuccess>true</cleanWhenSuccess>
 706       <cleanWhenUnstable>true</cleanWhenUnstable>
 707       <cleanWhenFailure>true</cleanWhenFailure>
 708       <cleanWhenNotBuilt>true</cleanWhenNotBuilt>
 709       <cleanWhenAborted>true</cleanWhenAborted>
 710       <notFailBuild>true</notFailBuild>
 711     </hudson.plugins.ws__cleanup.WsCleanup>
 712   </publishers>
 713   <buildWrappers>
 714     <com.michelin.cio.hudson.plugins.maskpasswords.MaskPasswordsBuildWrapper/>
 715     <hudson.plugins.build__timeout.BuildTimeoutWrapper>
 716       <timeoutMinutes>30</timeoutMinutes>
 717       <timeoutEnvVar>BUILD_TIMEOUT</timeoutEnvVar>
 718       <failBuild>true</failBuild>
 719       <writingDescription>false</writingDescription>
 720       <timeoutPercentage>0</timeoutPercentage>
 721       <timeoutMinutesElasticDefault>3</timeoutMinutesElasticDefault>
 722       <timeoutType>absolute</timeoutType>
 723     </hudson.plugins.build__timeout.BuildTimeoutWrapper>
 724     <hudson.plugins.timestamper.TimestamperBuildWrapper/>
 725     <com.cloudbees.jenkins.plugins.sshagent.SSHAgentBuildWrapper>
 726       <user>test-credential</user>
 727     </com.cloudbees.jenkins.plugins.sshagent.SSHAgentBuildWrapper>
 728     <jenkins.plugins.openstack.compute.JCloudsOneOffSlave/>
 729   </buildWrappers>
 730 </project>